Review of ultrasonic vibration-assisted machining in advanced materials

Compared to conventional machining (CM), ultrasonic vibration-assisted machining (UVAM) with high-frequency and small-amplitude has exhibited good cutting performances for advanced materials. In recent years, advances in ultrasonic generator, ultrasonic transducer, and horn structures have led to the rapid progress in the development of UVAM. Following this trend, numerous new design requirements and theoretical concepts have been proposed and studied successively, however, very few studies have been conducted from a comprehensive perspective. To address this gap in the literature and understanding the development trend of UVAM, a critical overview of UVAM is presented in this study, covering different vibration-assisted machining styles, device architectures, and theoretical analysis. This overview covers the evolution of typical hardware systems used to achieve vibratory motions from the one-dimensional UVAM to three-dimensional UVAM, the discussion of cutting characteristics with periodic separation between the tools and workpiece and the analysis of processing properties. Challenges for UVAM include ultrasonic vibration systems with high power, large amplitude, and high efficiency, as well as theoretical research on the dynamics and cutting characteristics of UVAM. Consequently, based on the current limitations and challenges, device improvement and theoretical breakthrough play a significant role in future research on UVAM.