Investigating the High-Temperature Bonding Performance of Refractory Castables with Ribbed Stainless-Steel Bars

Refractory materials containing calcium aluminate cement (CAC) are commonly used in the metallurgical and petrochemical industries due to their exceptional mechanical resistance, even at temperatures exceeding 1000 °C, and do not require additional reinforcement. This study seeks to advance this practice by developing ultra-high-performance structures that offer building protection against fire and explosions. Such structures require bar reinforcement to withstand accidental tension stresses, and the bond performance becomes crucial. However, the compressive strength of these materials may not correlate with their bond resistance under high-temperature conditions. This study investigates the bond behavior of ribbed stainless austenitic steel bars in refractory materials typical for structural projects. The analysis considers three chamotte-based compositions, i.e., a conventional castable (CC) with 25 wt% CAC, a medium-cement castable (MCC) with 12 wt% CAC, a low-cement castable (LCC), and a low-cement bauxite-based castable (LCB); the LCC and LCB castables contain 7 wt% CAC. The first three refractory compositions were designed to achieve a cold compressive strength (CCS) of 100 MPa, while the LCB mix proportions were set to reach a CCS of 150 MPa. Mechanical and pull-out tests were conducted after treatment at 400 °C, 600 °C, 800 °C, and 1000 °C; reference specimens were not subjected to additional temperature treatment. This study used X-ray fluorescence (XRF), X-ray diffraction (XRD), and scanning electron microscopy (SEM) methods to capture the material alterations. The test results indicated that the bonding resistance, expressed in terms of the pull-out deformation energy, did not directly correlate with the compressive strength, supporting the research hypothesis.