材料科学
沸石
腐蚀
复合数
化学工程
复合材料
核化学
催化作用
有机化学
工程类
化学
作者
Fengting Cao,Yaxiong Sun,Wei Wang,Meng Liu,Tie‐Gang Wang,Qixiang Fan
标识
DOI:10.1080/09276440.2025.2547145
摘要
Water-based epoxy coating (WEP) has attracted much attention due to its environmentally friendly nature, low toxicity, and excellent adhesion properties. However, its widespread application is hindered by its inherently porous microstructure and poor barrier performance. Here, sodium tungstate and cerous nitrate were chosen as precursors to modify zeolite for preparing composite fillers. The composition analysis of zeolite and its modified fillers Zeo-W, Zeo-Ce, and Zeo-W-Ce were carried out by SEM, XRD, FTIR, and XPS. Results showed that a new layer containing tungstate and cerium ions was formed on the surface of zeolite particles. The anti-corrosive properties of composite coatings for Q235 steel were evaluated by electrochemical methods (EIS, PDP) in 3.5 wt.% NaCl solution. EIS shows that the WEP/Zeo-W-Ce coating possesses the best anti-corrosion performance, and the low-frequency impedance modulus of the coating |Z|0.01 Hz is two orders of magnitude higher than that of WEP. Corrosion product analysis proved that this was mainly ascribed to both the passive barrier effect of zeolite and the synergistic inhibition effect of WO42− and Ce3+ in anode spot and cathode spot, respectively. The filler containing synergistic inhibitors in this work provides new ideas for the future design of WEP coatings with outstanding anti-corrosive performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI