Hydrogenation of Adiponitrile to Hexamethylenediamine over Raney Ni and Co Catalysts

Hexamethylenediamine (HMDA), a chemical for producing nylon, was produced on Raney Ni and Raney Co catalysts via the hydrogenation of adiponitrile (ADN). HMDA was hydrogenated from ADN via 6-aminohexanenitrile (AHN). For the two catalysts, the effects of five different reaction parameters (reaction temperature, H2 pressure, catalyst loading, and ADN/HMDA ratio in the reactant) on the hydrogenation of ADN were investigated. Similar general trends demonstrating the dependence of ADN hydrogenation on the reaction conditions for both catalysts were observed: higher temperature (60–80 °C) and H2 pressure, as well as lower ADN/catalyst and ADN/HMDA ratios, led to higher HMDA yields. A further increase in temperature from 80 to 100 °C increased the HMDA yield from 90.5 to 100% for the Raney Ni catalyst, but did not affect the HMDA yield (85~87%) for the Raney Co catalyst. A 100% HMDA yield (the highest yield reported to date) was also achieved via ADN hydrogenation over the Raney Ni catalyst, with a high HMDA content in the reactant (e.g., ADN/HMDA volumetric ratio of 0.06). No sign of metal leaching into the product solution was found, meaning that the Raney Ni and Raney Co catalysts were stable during ADN hydrogenation.