蜂巢
材料科学
蜂窝结构
结构工程
衰减
吸收(声学)
替代模型
变形(气象学)
最优化问题
灵敏度(控制系统)
复合材料
数学优化
机械
形状优化
能量(信号处理)
梯度法
集合(抽象数据类型)
压缩(物理)
衰减系数
多目标优化
基础(线性代数)
选择(遗传算法)
生物系统
作者
Jing Qian,Jiahui Li,Xiang Hua Peng,Zhongwen Ou,Jiquan Li,Shaofei Jiang
标识
DOI:10.1088/1361-665x/aeaf27
摘要
Abstract For energy-absorbing honeycomb structures, uniform configurations generally exhibit an inherent trade-off between reducing the initial peak force (IPF) and enhancing the specific energy absorption (SEA) capacity. To overcome this limitation, the multi-objective optimization framework for triangular–hexagonal gradient honeycomb structures is presented. The wall thickness ( t ) and gradient coefficient ( n ) were selected as design variables, and a multi-objective optimization model was formulated to minimize IPF while maximizing SEA. An adaptive Kriging surrogate model was constructed using a dataset of 39 quasi-static compression tests, and the Pareto-optimal solution set was obtained using the NSGA-II algorithm. Among these solutions, OPT-1 ( t = 1.16, n = 0.70) was identified as the representative compromise solution using the minimum-distance criterion. Compared with the 1.0 mm-thick uniform triangular honeycomb THS-2, OPT-1 increased SEA by 11.56% while reducing IPF by 19.61%. Moreover, relative to the 1.2 mm-thick uniform honeycomb THS-3, OPT-1 reduced IPF by 44.98% with only a marginal 4.93% decrease in SEA, demonstrating a more favorable compromise between load attenuation and energy absorption. In addition, OPT-1 exhibited a stable progressive layer-by-layer collapse mode, indicating enhanced deformation stability. These findings provide a theoretical basis and methodological guidance for the synergistic optimization of lightweight protective honeycomb structures.
科研通智能强力驱动
Strongly Powered by AbleSci AI