材料科学
电介质
复合材料
反射损耗
复合数
热稳定性
微波食品加热
导电体
介电损耗
固化(化学)
3D打印
单体
紫外线固化
墨水池
制作
热的
导电油墨
光电子学
限制
图层(电子)
蜂窝结构
紫外线
挤压
作者
Jinghan Qiao,Chunyang Zhang,Fulin Huai,Shengjie Zhang,Baihong Chi,Kuan Lu,Pengfei Wang,Mengzhu Li,Ya Kong,Jun Nie,Guiping Ma
出处
期刊:Small
[Wiley]
日期:2026-04-09
卷期号:22 (30): e73360-e73360
被引量:1
摘要
ABSTRACT The performance of structural electromagnetic absorbers critically depends on the dielectric matrix, which demands low permittivity, low loss, high mechanical strength, and good processability. However, traditional high‐performance dielectrics, typically formed by hot pressing, cannot be fabricated with complex architectures precisely. Photocurable 3D printing resins offer high precision but suffer from inadequate thermal stability, wave transparency, and structural reliability, limiting their practical use. In this work, a novel isocyanate‐functionalized monomer was designed and synthesized to construct a photo‐thermal curable low dielectric resin system. This resin enables rapid curing and shape fixation under UV irradiation, followed by secondary crosslinking during post‐thermal treatment, resulting in a dense and stable 3D network. The cured resin maintains a low dielectric constant (ε′ < 3.0) and low dielectric loss (tan δ < 0.01) in the X‐band, while exhibiting notable enhanced thermal stability (T g > 200°C) and mechanical performance (tensile strength > 80 MPa). A dielectric honeycomb scaffold was subsequently fabricated via 3D printing, into which graphene‐CoFe 2 O 4 powders were introduced, together with a conductive silver layer cured at the bottom. The resulting composite achieved a minimum reflection loss of −59.8 dB at a thickness of only 1.93 mm in the X‐band.
科研通智能强力驱动
Strongly Powered by AbleSci AI