钝化
材料科学
钙钛矿(结构)
结晶
氧气
化学工程
弯曲
能量转换效率
载流子寿命
复合材料
光电子学
纳米技术
图层(电子)
硅
化学
有机化学
工程类
作者
Yanling Tang,Yuchen Lei,Haiming Li,Yao Wu,Yunzhe Li,Shuqian Liu,Hanyu Wang,Xingchong Liu
标识
DOI:10.1016/j.apsusc.2023.158416
摘要
Flexible perovskite solar cells (F-PSCs) are currently a research hotspot due to their lightweight, solution processability, and low cost. However, oxygen vacancies in SnO2 would deteriorate the crystallization of perovskite, especially in F-PSCs due to the low temperature of SnO2 preparation with flexible substrates, thus inducing poor performance and decreased bending resistance. Here, trichlorobenzene sulfonic acid potassium salt (TSAPS) is used as an effective oxygen vacancy restrain additive on the SnO2 surface for F-PSCs. The oxygen vacancies are reduced from 68.40% to 45.26% after TSAPS modification. Meanwhile, the interfacial defects are suppressed by the synergistic passivation of individual ions in TSAPS, thus the carrier extraction and transportation are effectively improved. As a result, the PCE of the F-PSCs greatly increased from 15.22% to 18.63%. In addition, the unencapsulated SnO2/TSAPS-based flexible device can maintain 84% of its initial efficiency after 3000 bending cycles, exhibiting superior mechanical stability, while the control one decreased to only 9%. This work demonstrates a dependable method for improving the quality of the interface between the ETL and perovskite layer, resulting in enhanced bending resistance and performance for flexible PSCs.
科研通智能强力驱动
Strongly Powered by AbleSci AI