Modulation of Rayleigh–Bénard convection with a large temperature difference by inertial nonisothermal particles

This study investigates the modulation by inertial nonisothermal particles in two-dimensional Rayleigh–Bénard (RB) convection with non-Oberbeck–Boussinesq effects due to a large temperature difference. Direct numerical simulations combined with a Lagrangian point-particle method are performed for 1×106≤Ra≤1×108 and 6.1×10−3≤Stf≤1.2, where the Rayleigh number Ra and Stokes number Stf measure the vigor of convection and particle response time, respectively. The typical aspect ratio Γ = 1 is of primary concern. We find that a horizontally arranged double-roll flow pattern prevails at intermediate Stokes numbers with optimal heat transfer efficiency, which has never been reported before. Compared to the single-phase cases, the heat transfer efficiency is enhanced by a factor of two or three. For micro Stokes numbers, unlike cases in the Oberbeck–Boussinesq limit where the addition of particles causes a small amount of flow structure changes, in this study, it is observed that a tiny volume load of particles could actually induce significant flow oscillations or trigger fluid instability for Ra=106; conversely, for medium Rayleigh numbers (Ra=107), it is found that flow reversal is slightly suppressed by small particles. For intermediate Stokes numbers, where particle–fluid couplings are strongest and a wealth of new phenomena emerge, special attention is paid. Considering different aspect ratios, after the addition of particles, it is found that closed RB systems tend to contain an even number of convection rolls rather than odd ones. Quantitatively, heat transfer also improves significantly for various aspect ratios for intermediate Stokes numbers. Subsequent investigations reveal that the narrowing of the horizontal size of convection rolls cannot fully explain the significant enhancement; instead, it should also be attributed to strong couplings between particles and fluid dynamics. Moreover, it is found that both momentum and thermal couplings play crucial roles in enhancing heat transfer efficiency.