沥青
材料科学
乳状液
原材料
沥青路面
车辙
复合材料
极限抗拉强度
环境科学
废物管理
工程类
化学
化学工程
有机化学
作者
Katarzyna Konieczna,Jan Król
标识
DOI:10.1016/j.trpro.2023.11.180
摘要
Cold recycling technology is gaining popularity as an economically and environmentally effective way of pavement rehabilitation. The main benefits of the use of cold recycling mixtures (CRMs) in road base courses are associated with the reduction of raw materials consumption by replacing them with recycled materials such as Reclaimed Asphalt Pavement (RAP), as well as the decrease in energy consumption during production and paving compared to Hot Mix Asphalt (HMA). Bitumen Stabilised Materials (BSMs), described as non-continuously bound CRMs, exhibit granular and viscoelastic materials properties due to the presence of local bituminous bonds and a reduced amount of cement. Their mechanical properties are still being investigated. In this paper, Bitumen Stabilised Materials with bitumen emulsion (BSM-E) were investigated. Mixtures characterised by high fine particle content and designed with different Reclaimed Asphalt Pavement (RAP) and bitumen emulsion contents were subjected to Indirect Tensile Strength (ITS) tests at 25°C. TSR water resistance parameter for the mixtures was calculated. Test results were analysed using two-way ANOVA statistical tests. The laboratory test results showed that BSM-E mixtures exhibited different trends of an increase in ITSdry, ITSwet and TSR values as a function of bitumen emulsion content, depending on the RAP amount used. The statistical significance of the effects of bitumen emulsion content, RAP content, and the interaction between these two factors on the tested ITS values was proven.
科研通智能强力驱动
Strongly Powered by AbleSci AI