甲硫醇
硫化氢
吸附
化学
三甲胺
无机化学
沸石
活性炭
氨
氢
碳纤维
羰基硫醚
硫黄
有机化学
催化作用
材料科学
复合数
复合材料
作者
Tamotu MIYOSHI,Seiki Tanada,Keito Boki
出处
期刊:Sangyo igaku
[Japan Society for Occupational Health]
日期:1977-01-01
卷期号:19 (1): 2-7
被引量:4
摘要
Adsorption of hydrogen sulfide, methanethiol, methyl sulfide, trimethylamine, and ammonia on thirteen kinds of adsorbents (5 kinds of silicate, 4 kinds of activated carbon, and 4 kinds of zeolite) was measured by gravimetry, at 30 degrees C and 50 Torr, using an adsorption apparatus with a spring balance in order to find the most suitable adsorbent for the removal of these gases by dry process. The relations between the amount of these gases adsorbed (mmol/cm2) on the adsorbent and the surface properties or the porous structure were examined to clarify the mechanism of adsorption of these gases on them through surface pH, pore size distribution, and area of an adsorbed particle of these gases. Among the thirteen adsorbents, the activated carbon Nos. 6 and 7 were the most suitable adsorbent for methanethiol, methyl sulfide, and trimethylamine whose area of an adsobed particle (wrho) was larger than about 17 A2, and zeolite Nos. 12 and 13 were most suitable for removal of hydrogen sulfide and ammonia (wrho less than about 17A2). The amount of these gases adsorbed (mmol/cm2) on these adsorbents was mainly determined by their porous structure rather than by their surface properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI