Remediation characteristics of surfactant-enhanced air sparging (SEAS) technology on volatile organic compounds contaminated soil with low permeability

Surfactant-enhanced air sparging (SEAS) is an effective technology for the remediation of volatile organic compounds contamination of medium and high-permeability soil, though applying SEAS to low-permeability soil contamination has rarely been explored. In this study, a series of two-dimensional physical model tests were designed to explore the feasibility and remediation characteristics of SEAS on low-permeability soil. In the test results, the incorporation and increase in surfactant concentration promoted air channel formation in the low-permeability soil, finally reduced the capillary breakthrough pressure and improved the airflow rate. The majority of the exhausted gaseous contaminants were distributed along the horizontal direction, differing from the results observed in medium and high-permeability soils. The exhausted gaseous contaminant concentration changed slightly when the sparging pressure and surfactant concentration increased at relatively low levels and increased as the sparging pressure and surfactant concentration increased further. Increasing the air sparging pressure without surfactant incorporation or with a low surfactant concentration cannot effectively remove the contaminant, while the removal efficiency can be enhanced with further increases in surfactant concentration. The discrete remediation characteristics had been confirmed during SEAS application on low-permeability soil, then the relationships between the ratios of remediation area and remediation extent under different surfactant concentrations and sparging pressures were established for remediation efficiency evaluation. Using this method, the discrete remediation characteristics can be recreated once the surfactant concentration and the sparging pressure were chosen. On the other side, targeted improvements in the remediation area or extent can be achieved by controlling the surfactant concentration and sparging pressure. Through this study, SEAS technology and the proposed evaluation method were successfully implemented in soil with hydraulic conductivity around 9E-7 m/s, which expanded the application scope of SEAS technology for contaminant removal.