Optimization of Alkaline Pulp Extraction from Napier Grass Using Response Surface Methodology

Abstract Napier grass which has several types of them has been studied by researchers for few applications such as biofuel, sugar and pulp production. This research focused on specific type of Napier grass which is the Dwarf Napier due to high cellulose content to produce pulp. Delignification of Dwarf Napier grass was carried out by soda anthraquinone pulping under varying conditions selected according to experimental design software with three factors. The influence of these three factors including concentration of sodium hydroxide (15%, 17.5% and 20%), concentration of anthraquinone (0.05% and 0.1%) and duration of cooking time (30, 60 and 90 min) on pulp yield was studied. 18 runs of experiment were conducted and the result obtained was used to analyse the optimized condition for pulp extraction by using RSM. Results indicated that the optimized response obtained while Napier grass stem is treated with 17.5% sodium hydroxide and 0.05% AQ with 66 mins of cooking time meanwhile the predicted yield is 34.87 %. However, the actual pulp yield obtained (36.38%) is higher than the predicted yield. The pulp which extracted with optimized condition is then bleached with hydroxide peroxide. Fourier transform infrared spectroscopy (FTIR) was used to characterize the raw grass fiber and pulp obtained. Napier grass is successfully demonstrated to be an effective alternative source for producing paper pulp. In the this study Dwarf Napier grass fibres were successfully pulped applying soda AQ process although the obtained pulp is not as high as the studied done before due to the limitations. FTIR analysis also confirmed the removal of lignin as well as most of the hemicellulose during the pulping process. Therefore, the abundance and fast growth of Napier grass are an added advantage as an alternative non-wood source for papermaking