Small‐scale assessment method for the fire resistance of historic plaster system and timber structures

Abstract The primary protection against the charring of timber is ensured by protection materials. Today, there are only a limited number of materials given in design codes as fire protection materials for timber. Historic surface finish materials such as plasters have rarely been studied with respect to fire; no design values exist in the current fire part of Eurocode 5. Full‐scale fire testing is costly to assess the fire performance of material combinations, thus this study presents a useful tool that is specifically tailored to evaluate the fire protection ability of materials in small‐scale. A review of conducted tests demonstrate that the cone heater of a cone calorimeter is a dependable device to estimate the charring performance of protected timber specimens as the test results approximate the ones obtained from furnace tests. This work contributes to the assessment of fire resistance performance of various combinations and types of plaster systems found in existing timber buildings that often require an individual approach for an adequate fire risk analysis and design decisions to meet current fire safety regulations with respect to the load‐bearing capacity and compartmentation of building structures. Increased knowledge on the fire protection performance of traditional plasters is believed to facilitate their wider use in timber buildings, primarily to preserve their significance as part of the cultural built heritage.