材料科学
立方氧化锆
氢氟酸
粘结强度
复合材料
污染
水泥
硅酮
陶瓷
磨损(机械)
底漆(化妆品)
冶金
胶粘剂
化学
有机化学
生物
图层(电子)
生态学
作者
Maher S. Hajjaj,Saeed J. Alzahrani
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2022-07-21
卷期号:15 (14): 5068-5068
被引量:15
摘要
The aim of this study was to evaluate the effect of different cleaning methods on the shear bond strength (SBS) of resin cement to contaminated zirconia specimens. Eighty rectangular-shaped specimens (2 × 5 × 10 mm) were fabricated from Zirconia blocks (IPS e.max ZirCAD) and randomly divided into 8 groups (n = 10). Group A (control) was not exposed to contaminants. The following tests specimens were contaminated with saliva and silicone indicating paste. Group B was coated with ceramic primer, then subjected to contamination. Groups C, D, E, F, G, and H were contaminated; cleaned with water rinse, Ivoclean, air particle abrasion, hydrofluoric acid, KATANATM Cleaner and ZirCleanTM, respectively, and then coated with ceramic primer and bonded to dual cure resin cement cylinders. All the specimens were subjected to artificial aging and surviving specimens were subjected to the SBS test. For statistical analysis, ANOVA and multiple comparison methods at the 0.05 significance level were used. There was no statistically significant difference among Ivoclean (21.48 ± 2.90 MPa), air particle abrasion (21.92 ± 2.85 MPa), and the control group (24.68 ± 5.46). The application of ceramic primer before contamination did not preserve the SBS of resin cement to zirconia. Cleaning the contaminated zirconia surface with hydrofluoric acid (15.03 ± 3.63) or KATANATM Cleaner (17.27 ± 7.63) did not restore SBS to the uncontaminated state, but it was significantly higher than simply rinsing with water (12.46 ± 5.17) or the use of ZirCleanTM (11.59 ± 5.53). The bond strength of resin cement to zirconia was influenced by cleaning methods.
科研通智能强力驱动
Strongly Powered by AbleSci AI