Single-frequency LADAR super-resolution Doppler tomography for extended targets

Doppler tomography is an important means to obtain two-dimensional (2-D) images of remote targets. It is especially suitable for imaging spinning targets such as space debris, warheads, and aircraft blades. However, related research is mostly focused on the microwave band rather than the laser. Higher resolution can be achieved by implementing Doppler tomography in the laser band compared to the existing Doppler tomography in the microwave. Moreover, existing imaging methods are mostly directed at point targets. When these methods deal with extended target echoes, the image quality is unsatisfactory. These problems severely limit the application of Doppler tomography. Here, a novel laser Doppler tomography method has been proposed. The method is based on a single-frequency laser radar (LADAR) that does not require any form of wideband modulation of the transmitted signal. The imaging process is based on the precise relationship between the scattering coefficient of the target and the statistical characteristics of the Doppler spectrum and finds the maximum a posteriori (MAP) estimate of the scattering coefficient distribution. The imaging resolution depends on the Doppler frequency resolution, which exceeds the diffraction limit and is independent of the imaging distance. A laser Doppler tomography experimental system was established. With this system, high-quality laser Doppler tomograms of extended targets were obtained for the first time. In the experiment, the targets have different rotational speeds from 100 to 1000 r/min. The images of these targets with a resolution of 0.4 mm are obtained at a distance of 5 m indoors. In these images, the target details such as textures on the surfaces can be rendered. The quality of these images is greatly improved compared to existing processing methods. The experimental results confirm the effectiveness of the proposed laser Doppler tomography method.