Innovative CO2 capture technologies: Exploring the potential of porous liquids containing deep eutectic solvents and hypercrosslinked polymers

The current study presented a porous liquid (PL) prepared from propylene glycol-based deep eutectic solvent (DES) and hyper-crosslinked polymers (HCP) that are liquids over wide temperature ranges, including ambient temperature. It was shown that the solvent molecules are too large to penetrate the pores of HCP, so the PL is maintained as a suspension with permanent free volume for several months and can absorb large amounts of gases. This study marks the pioneering use of DESs as the liquid medium, replacing ionic liquids due to their closely matched properties. The structural features of both DES and HCP are retained; the increase in CO2 absorption capacity compared to pure DES is due to the presence of a porous solid and is proportional to the amount of solid. The absorbed CO2 amount rises from 1.0105 mmol·g−1 in pure DES to 1.3232, 1.6027, and 1.2168 mmol·g−1 in PL-1, PL-2, and PL-3, respectively. Thermodynamic analysis revealed that the enthalpy of gas absorption allows straightforward regeneration of the PLs in the studied cases. The investigated PLs show great potential as gas absorbents, with the incorporation of just 0.5 wt% of porous polymer material leading to an impressive increase in solvent absorption capacity, up to 59 %.