材料科学
异质结
响应时间
二氧化锡
检出限
纳米技术
电极
光电子学
纳米结构
二氧化硫
选择性
湿度
工作温度
降级(电信)
蛋壳膜
电化学
锡
持续监测
作者
Vikash Kumar Verma,Sourajit Mukherjee,Shorinjiryu Bhowmick,Usha Phogat,Pallabi Mukherjee,Rajour Tanyi Ako,Sharath Sriram,Shaibal Mukherjee
出处
期刊:Small
[Wiley]
日期:2026-09-23
卷期号:: e75902-e75902
摘要
ABSTRACT Sulfur dioxide (SO 2 ) is a critical pollutant associated with severe respiratory and cardiovascular effects, necessitating continuous monitoring in industrial and environmental settings. Existing analytical systems are accurate but bulky, expensive, and unsuitable for portable real‐time operation. Current metal‐oxide and 2D material‐based sensors still face challenges including limited selectivity, high operating temperatures, and slow sensing kinetics. This work aims to develop a highly selective SO 2 sensor using nickel‐loaded SnO 2 ‐MoS 2 hybrid nanostructures integrated on interdigitated electrode platforms. Pristine MoS 2 nanoflowers were synthesized, hybridized with SnO 2 , and loaded with controlled Ni concentrations to enhance electronic modulation and surface adsorption. The fabricated films were characterized using FESEM, EDS, Raman, XRD, and UV‐Vis and tested under dynamic gas exposure with real‐time resistance acquisition. The 4N‐SM‐4 sample (4:1 SnO 2 : MoS 2 with 4% Ni) demonstrated the best sensing behavior, achieving a response of 1609% at 20 ppm with a response time of 38 s, recovery time of 18 s, and a selectivity coefficient of 7. The limit of detection and quantification were 0.144 and 0.604 ppm, respectively. Excellent stability was observed across varying humidity and during 40‐day continuous evaluation. The portable IDE‐based readout system enables practical real‐time deployment.
科研通智能强力驱动
Strongly Powered by AbleSci AI