Carbon dioxide ($\mathrmCO_2$) hydrogenation to ethanol is a promising route for converting greenhouse gas emissions into value-added chemicals and fuels. This work investigated Fe-based catalysts promoted with Cu, Zn, and K for $\mathrmCO_2$ hydrogenation to ethanol, with particular emphasis on determining whether mixed $\mathrmCeO_2$-$\mathrmZrO_2$ supports could improve catalytic performance compared to the individual oxides and identifying the optimal support composition. The Fe/Cu ratio was first optimized on $\mathrmZrO_2$ and $\mathrmCeO_2$ supports, followed by an investigation of mixed $\mathrmCeO_2$-$\mathrmZrO_2$ supports and the individual and synergistic roles of Fe, Cu, Zn, and K. Catalytic testing was performed in a fixed-bed reactor at 40 bar, an $\mathrmH_2$/$\mathrmCO_2$ ratio of 3, and temperatures between 250 and 400 °C. The results showed that a catalyst containing 15 wt.\% Fe and 5 wt.\% Cu exhibited the highest performance among the investigated metal compositions. Among the supports studied, the mixed oxide containing 25 wt.\% $\mathrmCeO_2$ and 75 wt.\% $\mathrmZrO_2$ (CZ25) demonstrated the highest ethanol selectivity, outperforming both pure $\mathrmZrO_2$ and pure $\mathrmCeO_2$ supports. The FeCuZnK/CZ25 catalyst showed the best overall performance, achieving an ethanol selectivity of 15.13\% and an ethanol space-time yield (STY) of 4.78 $\mathrmmmol\ g_cat^-1\ h^-1$. These findings demonstrate that combining $\mathrmCeO_2$ and $\mathrmZrO_2$ can enhance the performance of Fe-based catalysts for $\mathrmCO_2$ hydrogenation to ethanol, with CZ25 identified as the most promising support composition.