扫描电子显微镜
复合数
微观结构
介电谱
电化学
材料科学
透射电子显微镜
阴极
电极
化学工程
锂(药物)
分析化学(期刊)
复合材料
纳米技术
化学
有机化学
工程类
物理化学
内分泌学
医学
作者
Zhao Lei,Weikun Wang,An-Bang Wang,Zhongbao Yu,Shi Chen,Yusheng Yang
摘要
The mesoporous carbon (MC)/9,10-anthraquinone(AQ) parasitic composite is prepared by thermally treating a mixture of AQ and MC. As AQ ratio is 68%(w/w) in the composite, scanning electron microscopy (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), mercury porosimeter, and Brunauer-Emmett-Teller (BET) characterization show that AQ is parasitized inside nano-pores of MC in the composite. Tested as the cathode material in a lithium cell at room temperature, compared to AQ electrode, the composite electrode shows better electrochemical performance. It exhibits a specific capacity up to 222 mAh.g1 at the initial discharge and its specific capacity remains 97 mAh.g1 after 50 cycles. Meanwhile, the parasitic composite also exhibits a high-rate behavior at a current density of 600 mA.g1. Electrochemical impedance spectroscopy (EIS) is introduced to understand the impact of the microstructure of composite on electrochemistry. Furthermore, morphology analysis of AQ and composite electrodes in different discharge stages confirms that the adsorption of MC makes the electrochemical reaction restrict within the areas of pores, which can maintain the stable structure during the charge and discharge process. VC 2011 The Electrochemical Society. [DOI: 10.1149/1.3605719] All rights reserved. Manuscript submitted February 21, 2011; revised manuscript received June 8, 2011. Published July 5, 2011. Energy can be considered as the lifeblood of our modern society. However, the widespread use of coal and petroleum doesn’t meet the needs of the low-carbon economy and sustainable development.
科研通智能强力驱动
Strongly Powered by AbleSci AI