IMPROVED DESIGN AND EXPERIMENT OF ANTI-CLAY ADHESION FOR NOTILLAGE MAIZE PLANTER SEEDING MONOMER

When the seeding monomer of no-tillage maize planter operates in sticky and wet soil, soil bonding and blocking of soil-touching parts will occur to different degrees, leading to functional failure and affecting the quality of seeding operation. Aiming to improve the anti-adhesion property with minimum cost, a seeding monomer is modified to operate in sticky and wet soil with the support of TRIZ (Theory of Inventive Problem Solving). There are two major scheme adjustments, including self-cleaning seedbed collating device and split gauge wheel. The Su-field model of seedbed collating device is constructed, and the design scheme of smaller wavy coulter and dirt scraper is proposed on the basis of the standard-solution tool and water-film theory. And the parameters of the wave are determined on account of force analysis of soil particles and bionic earthworm. Based on the systemic-functional analysis of the seeding depth-limiting device and the force analysis of gauge wheel during operation, a split type of depth-gauge wheel with large lug hole is designed. As a result, the field trial demonstrates that the improved monomer could meet the operation requirements of clay soil with the water content of 15%-25%. Compared with the original model, the residual clay content is decreased (seedbed collating device 57.5%, gauge wheel seeding depth-limiting device 10%). This study can provide reference for the anti-adhesion design of soil-contacting parts of agricultural machinery.