Implementation of n+ and p+ Poly Junctions on Front and Rear Side of Double-Side Contacted Industrial Silicon Solar Cells

硅 前线(军事) 材料科学 光电子学 光学 物理 工程类 机械工程
作者
Robby Peibst,Yevgeniya Larionova,Sina Reiter,M. Turcu,Rolf Brendel,Dominic Tetzlaff,Jan Krügener,Tobias F. Wietler,Uwe Höhne,J.-D. Kähler,Heiko Mehlich,S. Frigge
出处
期刊: 卷期号:: 323-327 被引量:42
标识
DOI:10.4229/eupvsec20162016-2bo.3.2
摘要

We present building blocks for double-side contacted cells with poly-Si on passivating interfacial oxides (POLO) junctions for both polarities, fabricated by a lean process flow. For this purpose, we evaluate p+ and n+ POLO junctions utilizing ~1.7 nm thin wet chemically grown (ozone diluted in di-ionized water) and ozone grown interfacial oxides on different surface morphologies. We achieve excellent passivation quality on damaged etched (100) surfaces with record low J0 values of 0.6 fA/cm2 (implied open circuit voltage Voc,impl 748 mV) for n+ POLO junctions and of 5 fA/cm2 (Voc,impl 729 mV) for p+ POLO junctions. However, on alkaline textured surfaces, ~6 times higher J0 values are obtained. We compare ex-situ-doped poly-Si (intrinsically deposited and subsequently ion implanted) with in-situ-doped poly-Si layers. For POLO junctions formed on textured surfaces by utilizing wet chemical oxides and low-pressure chemical vapor deposition (LP-CVD) of 20 nm in-situ n+-doped poly-Si, we obtain J0 values down to 2.4 fA/cm2. Also with plasma-enhanced chemical vapor deposition (PE-CVD) of in-situ-doped amorphous Si and subsequent crystallization, we obtain comparable results. A transparent conductive oxide (TCO), preferably temperature stable, seems to be required to support the limited lateral conductivity of POLO junctions with poly-Si layer thicknesses ≤ 20 nm. We find that the conductivity of indium tin oxide (ITO) strongly decreases upon firing, while the initial conductivity can be maintained even for firing temperatures of 800°C when capping the ITO with a thin SiNx layer. Our recent cell precursors (156 mm 156 mm Cz n-type wafers with an n+ POLO junction on an alkaline textured front-side and a p+ POLO junction on a damage-etched rear-side) exhibit a promising Voc,impl value of 732 mV, and a total J0 value of the doped surfaces of 12 fA/cm2. In combination with the high pseudo fill factor of 85.3 % and with a short-circuit current density of 40 mA/cm2 as calculated by ray tracing simulations, the corresponding pseudo efficiency is 25.0 %.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
高挑的向南完成签到,获得积分10
刚刚
传奇3的应助被标致书易采纳,获得10
1秒前
win7完成签到,获得积分10
1秒前
1秒前
2499297293发布了新的文献求助10
1秒前
1秒前
狂野的高山完成签到,获得积分10
1秒前
mingxing818完成签到,获得积分10
2秒前
2秒前
2秒前
初景发布了新的文献求助30
3秒前
3秒前
老八完成签到,获得积分10
3秒前
QINJINGRUI发布了新的文献求助10
3秒前
wuxiaojiao发布了新的文献求助10
3秒前
3秒前
wt完成签到 ,获得积分10
4秒前
4秒前
希望天下0贩的0的应助被发发采纳,获得10
4秒前
5秒前
6秒前
6秒前
6秒前
小二郎的应助被朗姆蓝莓采纳,获得10
7秒前
元谷雪发布了新的文献求助10
7秒前
showtime发布了新的文献求助30
7秒前
JunChou完成签到,获得积分10
7秒前
7秒前
Maestro_S的应助被Chenzr采纳,获得10
8秒前
8秒前
ding的应助被柴六斤采纳,获得10
9秒前
科研大佬修炼手册给科研大佬修炼手册的求助进行了留言
9秒前
科研狂人发布了新的文献求助10
9秒前
9秒前
sqqx发布了新的文献求助10
9秒前
大模型的应助被2499297293采纳,获得10
10秒前
10秒前
在望的应助被LW采纳,获得10
10秒前
10秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
Resource Recovery Handbook 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8175556
求助须知:如何正确求助?哪些是违规求助? 9567240
关于积分的说明 21791502
捐赠科研通 7770174
什么是DOI,文献DOI怎么找? 3431868
关于科研通互助平台的介绍 2556244
邀请新用户注册赠送积分活动 2477299