Physical Properties of Candidate X-ray Detector Material Rb4Ag2BiBr9

Recently, metal halide perovskites have emerged as promising semiconductor candidates for sensitive X-ray photon detection due to their suitable bandgap energies, excellent charge transport properties, and low material cost afforded by their low-temperature solution-processing preparation. Here, we report an improved methodology for single crystal (SC) growth, thermal and electrical properties of a two-dimensional (2D) layered halide material Rb4Ag2BiBr9, which has been identified as a potential candidate for X-ray radiation detection applications. The measured heat capacity for Rb4Ag2BiBr9 implies that there are no structural phase transitions upon cooling. Temperature dependence of thermal transport measurements further suggest remarkably low thermal conductivities of Rb4Ag2BiBr9 that are comparable to the lowest reported in literature. The bulk crystal resistivity is determined to be 2.59×109 Ω·cm from the current-voltage (I-V) curve. Density of trap states are estimated to be ~1010 cm-3 using the space-charge-limited-current (SCLC) measurements. The fabricated Rb4Ag2BiBr9-based X-ray detector shows good operational stability with no apparent current drift, which may be ascribed to the 2D crystal structure of Rb4Ag2BiBr9. Finally, by varying the X-ray tube current to change the corresponding dose rate, the Rb4Ag2BiBr9 X-ray detector sensitivity is determined to be 222.03 uCGy-1cm-2 (at an electric field of E = 24 V/mm).