制作
结晶度
退火(玻璃)
材料科学
带隙
钙钛矿(结构)
化学工程
太阳能电池
相(物质)
相变
光电子学
化学
复合材料
热力学
医学
替代医学
物理
有机化学
病理
工程类
作者
Fangwen Cheng,Shaoqi Zhan,Xinfeng Dai,Xiaofeng Huang,Binghui Wu,Nanfeng Zheng
出处
期刊:Energy & Fuels
[American Chemical Society]
日期:2021-08-17
卷期号:35 (23): 19035-19044
被引量:18
标识
DOI:10.1021/acs.energyfuels.1c02175
摘要
α-FAPbI 3 -based perovskite solar cells have recently attracted increasing attention as a result of an ideal bandgap and longer exciton lifetime of FAPbI 3 compared to perovskites with other compositions. However, in a traditional fabrication method, the α-FAPbI 3 films were usually obtained by a direct phase transition from δ to α phase at a high annealing temperature, leading to low quality with poor crystallinity and numerous defects. The formation and stabilization of phase-pure, material-pure, high-quality α-FAPbI 3 films remain challenging. In this work, a FA vapor-assisted cation-exchange pathway from low-dimensional perovskites to three-dimensional α-FAPbI 3 was built, through which phase-pure and material-pure α-FAPbI 3 films were achieved at 100 °C below the temperature of thermodynamic δ-to-α phase transition (∼150 °C). Through an in-depth study, the cation-exchange pathway was found to have a low reaction barrier directly toward α-FAPbI 3 and suppress the formation of δ-FAPbI 3, leading to high-quality α-FAPbI 3 with high orientation and few trap states at a low annealing temperature. Consequently, small-area devices and large-area modules with as-prepared α-FAPbI 3 films were achieved with improved performance, showing great potential for further study and application.
科研通智能强力驱动
Strongly Powered by AbleSci AI