Size- and structure-dependence of thermal and mechanical behaviors of single-crystalline and polytypic superlattice ZnS nanowires

Molecular dynamics (MD) simulations are carried out to study the thermal and mechanical behaviors of single-crystalline wurtzite (WZ), zinc-blende (ZB), and polytypic superlattice ZnS nanowires containing alternating WZ and ZB regions with thicknesses between 1.85 nm and 29.62 nm under tensile loading. The wires analyzed have diameters between 1.77 nm and 5.05 nm. The Green-Kubo method is used to calculate the thermal conductivity of the wires at different deformed states. A non-equilibrium MD approach is used to analyze the thermal transport behavior at the interfaces between different structural regions in the superlattice nanowires (SLNWs). The Young's modulus and thermal conductivity of ZB nanowires are approximately 2%–12% and 23%–35% lower than those of WZ nanowires, respectively. The lower initial residual compressive stress due to higher irregularity of surface atoms causes the Young's modulus of ZB nanowires to be lower. The dependence of the thermal conductivity on structure comes from differences in phonon group velocities associated with the different wires. The thermal conductivity of polytypic superlattice nanowires is up to 55% lower than that of single-crystalline nanowires, primarily because of phonon scattering at the interfaces and the resulting lower effective phonon mean free paths for each structural region. As the periodic lengths (1.85–29.62 nm) and specimen lengths (14.81–59.24 nm) of SLNWs decrease, these effects become more pronounced, causing the thermal conductivity to further decrease by up to 30%.