反推
控制理论(社会学)
控制器(灌溉)
控制工程
补偿(心理学)
制动器
自适应控制
计算机科学
工程类
机制(生物学)
控制系统
自适应系统
控制(管理)
弹道
车辆动力学
作者
Lin He,Hui Li,B M Zhang,Xianglong Li,Xinxin Zheng,Yujiang Wei
标识
DOI:10.1177/09544070261463269
摘要
The brake-by-wire system of autonomous driving vehicles is facing two challenges, mechanism-decoupled architecture and pressure-hydraulic following. The mechanism-decoupled architecture may realize an independent braking, where the brake pedal does not follow-up. The pressure-hydraulic following may realize an accurate braking by wire. In this article, we design a parallel mechanism that does not make the brake pedal follow the lead screw action, which is formulated to be a machine-hydraulic dynamics model. A backstepping controller with adaptive LuGre friction compensation is developed to control the brake-by-wire system for the pressure-hydraulic demand. A mBooster is produced to be provided with the parallel mechanism, which is assembled into a self-driving van as an experimental platform. Some comparative simulations and experiments between the adaptive backstepping controller and the proportional-integral controller, are tested in the self-driving van with the mBooster brake-by-wire system. According to the experimental results, it is concluded that the mBooster by the adaptive backstepping controller is a good brake-by-wire candidate for the self-driving vehicle.
科研通智能强力驱动
Strongly Powered by AbleSci AI