材料科学
压力传感器
变形(气象学)
压阻效应
压实
线性
灵敏度(控制系统)
光电子学
接触面积
压缩(物理)
导电体
流离失所(心理学)
制作
微电子机械系统
光学
工作(物理)
有限元法
复合材料
侧向应变
声学
微流控
压力测量
电极
纳米技术
接触电阻
作者
Ming Lei,Meng Chenlong,Biao Qi,Yuanzhe Liang,Zidong Yin,Jiayi Xu,Bingpu Zhou,Yanan Zhang
标识
DOI:10.1021/acsaelm.6c01672
摘要
Abstract Reconciling high sensitivity with linearity over a broad pressure range remains a central challenge for flexible piezoresistive pressure sensors, because microstructured conductive interfaces often undergo rapid compaction under increasing pressure. Here, we report crater-inspired microdome arrays that couple a laser-roughened annular rim, hollow cavity, and inclined sidewalls to regulate staged deformation and conductive-contact evolution during compression. The architecture is fabricated by template-assisted replication followed by localized laser ablation, which converts closed microdomes into open crater-like units. Under loading, unlike solid microdomes that undergo continuous compression and flattening, the CMDA establishes localized contact through the annular rim, while the hollow cavity accommodates continued inward deformation and the high-stress region progressively extends toward the inclined sidewalls. This rim-initiated, cavity-assisted, and sidewall-supported deformation enables rapid resistance modulation at low pressure while delaying structural compaction and sustaining progressive contact evolution at high pressure. The optimized sensor delivers a linear piezoresistive response over 0–1200 kPa with a sensitivity of 158.1 kPa–1, and its applicability is demonstrated in physiological monitoring, motion sensing, and pressure-encoded human–machine interaction. This work demonstrates an open-apex microstructural strategy that spatially separates contact initiation, deformation accommodation, and load support within a single microdome, thereby providing a structural route to flexible piezoresistive sensors that combine high sensitivity with megapascal-range linearity.
科研通智能强力驱动
Strongly Powered by AbleSci AI