A general framework and review of scatter correction methods in cone beam CT. Part 2: Scatter estimation approaches

The main components of scatter correction procedures are scatter estimation and a scatter compensation algorithm. This paper completes a previous paper where a general framework for scatter compensation was presented under the prerequisite that a scatter estimation method is already available. In the current paper, the authors give a systematic review of the variety of scatter estimation approaches. Scatter estimation methods are based on measurements, mathematical–physical models, or combinations of both. For completeness they present an overview of measurement‐based methods, but the main topic is the theoretically more demanding models, as analytical, Monte‐Carlo, and hybrid models. Further classifications are 3D image‐based and 2D projection‐based approaches. The authors present a system‐theoretic framework, which allows to proceed top–down from a general 3D formulation, by successive approximations, to efficient 2D approaches. A widely useful method is the beam‐scatter‐kernel superposition approach. Together with the review of standard methods, the authors discuss their limitations and how to take into account the issues of object dependency, spatial variance, deformation of scatter kernels, external and internal absorbers. Open questions for further investigations are indicated. Finally, the authors refer on some special issues and applications, such as bow‐tie filter, offset detector, truncated data, and dual‐source CT.