生物相容性
材料科学
超临界流体
聚合物
发泡剂
成核
化学工程
纳米复合材料
纳米颗粒
石墨烯
氧化物
复合材料
多孔性
纳米技术
化学
有机化学
冶金
工程类
作者
Bahareh Kamyab Moghadas,Amin Akbarzadeh,Mohammad Azadi,Alireza Aghili,Ali Shokuhi Rad,Sara Hallajian
标识
DOI:10.1080/10601325.2020.1718509
摘要
In this study, octadecyl amine modified graphene oxide nanoparticles were used as a potential nucleating agent in the foaming process of the polymer, to increase its functions, especially for tissue engineering purposes. It has been established that the nucleation in the polymer depends on four factors of the nanoparticle weight percentage, foaming temperature, saturation pressure and the foaming time; however, it was found that the most important and effective variables are the nanoparticle weight percentage and then the foaming temperature followed by foaming time. Polymer foams have particularly good dimensional stability, and a proper change in the process variables can control the internal structure of the foam. In this study, adding 8% of modified graphene oxide as the nucleating agent, reduced the average diameter of polyethersulfone foam cells from 4.6 to 2.7 μm, or an increase of 40 °C in foaming temperature, increased the average diameter of the cells from 2.7 to 4.3 µm. Also, the toxicity tests and biocompatibility studies showed that the porous substance made by this method is nontoxic and can be used as a scaffold in the living bodies.
科研通智能强力驱动
Strongly Powered by AbleSci AI