A strong nucleophilic fluorination agent to achieve highly stable in-situ 3D cross-linked gel polymer electrolyte for lithium-ion batteries

The Gel Polymer Electrolyte (GPE) is recognized as a promising alternative to conventional electrolytes, aiming to enhance the longevity and energy density of lithium-ion batteries (LIBs). However, several challenges persist, particularly concerning the conductivity and voltage window of GPE in battery systems. In this study, we introduce an in-situ 3D crosslinked GPE, using polymethyl methacrylate (PMMA) as the monomer and polyethylene glycol dimethacrylate (PEGDMA) as the crosslinking agent, to ensure structural stability and optimized ion conductivity. We also incorporate a potent nucleophilic fluorination agent, Tetrabutylammonium fluoride (TBAF), to augment the compatibility and oxidation resistance of the formulated FGPPE. The recurring (–CH2CH2O-) units of PEGDMA, coupled with in-situ lithium fluoride (LiF) and C-F groups introduced by TBAF, endow the FGPPE with a remarkable ionic conductivity of 7.8 mS cm−1 and a distinctly electrochemical stability of 4.65 V. Notably, the Li metal anode, featuring an F-rich solid-state interface (SEI), demonstrates uniform Li+ deposition, sustaining a cycling life of 1000 h and maintaining a commendable average coulomb efficiency of 98.5 % over 300 cycles. Additionally, the NCM811/SiC pouch cell integrated with FGPPE showcases superior cycling stability, retaining 99.4 % of its capacity after 600 cycles at an elevated voltage of 4.45 V. Such advancements in gel polymer electrolyte design can significantly expedite the commercial deployment of gel polymer Li-ion batteries.