Enhancing lead immobilization by biochar: Creation of “surface barrier” via bio-treatment

The long-term effectiveness of heavy metal immobilization is always a concern. This study proposes a completely novel approach to enhance the stability of heavy metals by combined biochar and microbial induced carbonate precipitation (MICP) technology, to create a “surface barrier” of CaCO3 layer on biochar after lead (Pb2+) immobilization. Aqueous sorption studies and chemical and micro-structure tests were used to verify the feasibility. Rice straw biochar (RSB700) was produced at 700 °C, which shows high immobilization capacity of Pb2+ (maximum of 118 mg g−1). But the stable fraction only accounts for 4.8% of the total immobilized Pb2+ on biochar. After MICP treatment, the stable fraction of Pb2+ significantly increased to a maximum of 92.5%. Microstructural tests confirm the formation of CaCO3 layer on biochar. The CaCO3 species are predominantly calcite and vaterite. Higher Ca2+ and urea concentrations in cementation solution resulted in higher CaCO3 yield but lower Ca2+ utilization efficiency. The main mechanism of the “surface barrier” to enhance Pb2+ stability on biochar was likely the encapsulation effect: it physically blocked the contact between acids and Pb2+ on biochar, and chemically buffer the acidic attack from the environment. The performance of the “surface barrier” depends on both the yield of CaCO3 and their distribution uniformity on biochar's surface. This study shed lights on the potential application of the “surface barrier” strategy combining biochar and MICP technologies for enhanced heavy metal immobilization.