Hydrogen production through aluminium corrosion in a cement‐based matrix

Abstract In France, deep geological disposal is considered for the storage of high and intermediate‐level long‐lived radioactive wastes. For aluminium, the possibility to encapsulate the wastes in a cement‐based matrix is studied. However, cement being an alkaline environment, aluminium can lose its passivity, starts to corrode leading to hydrogen evolution in the infrastructures and generate a possible explosive hazard after decades of storage if hydrogen can accumulate somewhere in the facility. It is therefore necessary to study the corrosion behaviour of aluminium in the different cements considered for the encapsulation to estimate the possible amount of hydrogen that could be generated through corrosion and design the cement capsules accordingly. This work mainly focused on the reaction occurring at the aluminium‐cement interface. Raman spectroscopy did not highlight significant differences in the nature of the corrosion products forming at the cement/aluminium interface, leading to the conclusion that it is not the chemistry of the cement that is the key factor controlling the corrosion rate but rather the physical properties of the cement matrix.