材料科学
有机太阳能电池
光电子学
表面能
能量转换效率
化学工程
锌
聚合物
复合材料
冶金
工程类
作者
Dinh Cung Tien Nguyen,Hanok Park,Han Young Woo,Sejung Kim,Soo‐Hyoung Lee
标识
DOI:10.1021/acsaem.3c00885
摘要
Using an interfacial modifier (IM) agent to overcome interfacial problems of zinc oxide (ZnO), which is commonly used as an electron transport layer (ETL), is an effective interfacial engineering strategy that can be used to improve the performance and stability of optoelectronic devices, such as inverted organic solar cells ( i OSCs). In this work, a conjugated polymer electrolyte (CPE) is employed as an IM agent to modify the surface morphology of ZnO ETL-based i OSC devices. Compared to a pristine ZnO ETL, the CPE-modified ZnO (CPE/ZnO) ETL is more hydrophobic with a smooth surface induced by an interfacial dipole, resulting in better energy alignment to the LUMO of the photoactive layer. The power conversion efficiency (PCE) of poly(3-hexylthiophene) (P3HT) and phenyl-C 60 -butyric acid methyl ester (PCBM) blend-based planar i OSCs with a CPE/ZnO ETL increases from 3.8% to 4.2% and from 1.8% to 2.2% for bottom and top transparent devices, respectively. The CPE/ZnO ETL is further employed to fabricate a fiber-shaped i OSC (FS- i OSC), which is a promising wearable optoelectronic device. In FS- i OSCs fabricated by a dip-coating method with a CPE/ZnO ETL, the PCE improves to 1.02%, which is a near 2-fold improvement over devices using a pristine ZnO ETL. Additionally, our concept has also been successfully applied to inverted polymer light-emitting diodes ( i PLED) with planar and fiber-shaped configurations. These results suggest that the surface modification of metal oxide ETLs (e.g., ZnO) with organic interfacial modifiers (e.g., CPE) is a simple but effective approach to fabricating planar and fiber-shaped optoelectronic devices with high performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI