Study of interfacial transition zones between magnesium phosphate cement and Portland cement concrete pavement

The Portland cement concrete pavement (PCCP) often suffers from different environmental distresses and vehicle load failure, resulting in slab corner fractures, potholes, and other diseases. Rapid repair has become one of the effective ways to open traffic rapidly. In this study, a novel type of rapid repair material, basalt fiber reinforced polymer modified magnesium phosphate cement (BFPMPC), is used to rapidly repair PCCP. Notably, the mechanical properties and characteristics of the repair interfaces which are named interfacial transition zones (ITZs) formed by BFPMPC and cement concrete are focused on as a decisive factor for the performance of the rapid repair. The changing trend of the elastic moduli was studied by nanoindentation experiments in the ITZs with the deconvolution analysis that the elastic moduli of certain kinds of substances can be determined. The experimental results show that the elastic modulus of ITZ-1 with a width of about 20 μm can be regarded as 0.098 times of the aggregate, and 0.51 times of the ordinary Portland cement (OPC) mortar. The BFPMPC-OPC mortar ITZ has roughly the same mechanical properties as the ITZ between aggregate and BFPMPC. A multi-scale representative two-dimensional model was established by random aggregate and a two-dimensional extended finite element method (XFEM) to study the mechanical properties of the repair interface. The simulation results show that the ITZ formed by the interface of BFPMPC and OPC mortar and basalt aggregate is the most vulnerable to failure, which is consistent with the nano-indentation experimental results.