Blow-assisted multi-jet electrospinning of poly-L-lactic acid nanofibers

Regardless the low production rate, electrospinning remains the attractive technique for the nanofibers production in various fields. Thus, the development of a multi-jet technologies for electrospinning gives an opportunity to scale up and increase throughput of the fibers production. However, the multi-jet electrospinning technologies exhibit one major drawback– electrostatic mutual jet repulsion issue. In present research, we propose air blow-assisted multi-jet electrospinning system allowing production of nanofibers with yield, at least, tenfold higher than single jet electrospinning. The system produces nanofibers in two modes: multi-jet electrospinning and blow-assisted multi-jet electrospinning. In case of the latter, the application of sheath air stream allows the system to overcome the electrostatic mutual repulsion issue. These lead to the reduction of deviation of the polymer solution jets, the reduction of instabilities of the jets and the improvement of the control of the nanofibers deposition. Nanofibers morphology and size were investigated based on the scanning electron microscope micrographs. The comparison of the two modes shows changes in nanofibers morphology from beaded structure to fine nanofibers, and the slight increase in fiber mean size when the blowing assistance was applied to the process.