清晨好,您是今天最早来到科研通的研友!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您科研之路漫漫前行!

Effect of multilayer laser cladding on the microstructure and wear resistance of SiC/Ni60A coatings

材料科学 微观结构 包层(金属加工) 压痕硬度 复合材料 涂层 复合数 扫描电子显微镜 合金 耐磨性 光学显微镜 极限抗拉强度 激光器 图层(电子) 衍射 胶粘剂 焊接 冶金 碳钢
作者
Z. K. Wang,Changbao Qi,Kai Wang
出处
期刊:Scientific Reports [Nature Portfolio]
卷期号:16 (1) 被引量:3
标识
DOI:10.1038/s41598-026-43832-x
摘要

A fiber laser was used to perform multiple laser cladding passes on AISI 1045 steel to fabricate SiC particle-reinforced Ni60A alloy coatings. The microstructure and phase composition of the cladding layers were analyzed using optical microscopy, X-ray diffraction scanning electron microscopy and energy-dispersive spectroscopy. The microhardness and wear performance of coatings with different numbers of cladding layers were tested using a microhardness tester and a wear testing machine. The results show that the SiC/Ni60A composite coating, prepared by synchronously adding 20% SiC to a Ni60A matrix during laser cladding, is primarily composed of phases such as FeN 3 , Gr 0.19 Fe 0.7 Ni 0.11 , Gr 23 C 6 , and Ni 31 Si 12 .In the single-layer cladding coating, blocky crystals dominate the microstructure, whereas dendritic structures are predominant in the double- and triple-layer coatings. At the interface between the first and second layers of the four-layer coating, the maximum tensile stress reaches 350 MPa. As the number of coating layers increases, the number of cracks and pores increases, while the average microhardness and wear resistance decrease. For repairing components with deep damage (greater than 0.5 mm), two- or three-layer cladding should be employed, resulting in a coating thickness of approximately 1.5–2.5 mm.For the two-layer SiC/Ni60A composite coating, the average microhardness of the cladding layer is 962 HV, 4.3 times that of the AISI 1045 steel substrate. When using two-layer laser cladding, the relative wear of the cladding layer reaches 0.0018 g, and the wear resistance at this time is 4.7 times that of the substrate. The primary wear mechanism of the multilayer SiC/Ni60A cladding is adhesive wear, accompanied by abrasive wear.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
菜鸟学习完成签到 ,获得积分10
刚刚
wayne完成签到 ,获得积分0
1秒前
junio完成签到 ,获得积分10
1秒前
威武的迎蓉完成签到,获得积分10
11秒前
慎独而已完成签到,获得积分10
14秒前
gzhy完成签到,获得积分10
19秒前
19秒前
科研通AI65的应助被RZH采纳,获得10
20秒前
充电宝的应助被慎独而已采纳,获得10
20秒前
馄饨炖饺子完成签到 ,获得积分10
22秒前
幸世完成签到 ,获得积分10
22秒前
浮生若梦发布了新的文献求助10
23秒前
沉静问芙完成签到,获得积分10
23秒前
淡淡的王大可完成签到 ,获得积分10
25秒前
犹豫的翠柏完成签到 ,获得积分10
26秒前
28秒前
辛夷完成签到,获得积分10
29秒前
慎独而已发布了新的文献求助10
33秒前
无忧的阳光完成签到 ,获得积分10
34秒前
我爱木棉完成签到 ,获得积分10
39秒前
Ava的应助被chun采纳,获得30
41秒前
在路上完成签到 ,获得积分10
42秒前
43秒前
51秒前
聪慧天真完成签到,获得积分10
53秒前
chichenglin完成签到 ,获得积分0
58秒前
hy发布了新的文献求助10
1分钟前
hilufite完成签到,获得积分10
1分钟前
蚂蚁飞飞完成签到,获得积分10
1分钟前
syvshc的应助被初景采纳,获得10
1分钟前
研究所普朗克完成签到 ,获得积分10
1分钟前
Seagull完成签到,获得积分10
1分钟前
子车半烟完成签到,获得积分10
1分钟前
阿俊1212完成签到 ,获得积分10
1分钟前
谢谢你好心人完成签到 ,获得积分10
1分钟前
1分钟前
闪闪的访烟完成签到,获得积分10
1分钟前
chun完成签到,获得积分20
1分钟前
ZZZ完成签到 ,获得积分10
1分钟前
leapper发布了新的文献求助10
1分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8173230
求助须知:如何正确求助?哪些是违规求助? 9565593
关于积分的说明 21780525
捐赠科研通 7767429
什么是DOI,文献DOI怎么找? 3431542
关于科研通互助平台的介绍 2555764
邀请新用户注册赠送积分活动 2476697