Critical numerical analysis of quasi-two-dimensional silo-hopper discharging

阀体孔板 筒仓 机械 离散元法 粒子(生态学) 计算机模拟 流量(数学) 材料科学 数值分析 体积流量 物理 数学 地质学 机械工程 数学分析 海洋学 工程类
作者
Rodolfo Blanco‐Rodríguez,R. C. Hidalgo,Gabriel Pérez-Ángel,Diego Maza
出处
期刊:Granular Matter [Springer Science+Business Media]
卷期号:23 (4) 被引量:11
标识
DOI:10.1007/s10035-021-01159-6
摘要

Abstract We present a critical comparative analysis between numerical and experimental results of quasi-two-dimensional silo and hopper flows. In our approach, the Discrete Element Method was employed to describe a single-layer mono-disperse sphere confined by two parallel walls with an orifice at the bottom. As a first step, we examined the discharge process, varying the size of the outlet and the hopper angle. Next, we set the simulation parameters fitting the experimental flow rate values obtained experimentally. Remarkably, the numerical model captured the slight non-monotonic dependence of the flow rate with the hopper angle, which was detected experimentally. Additionally, we analyzed the vertical velocity and solid fractions profiles at the outlet numerically and experimentally. Although numerical results also agreed with the experimental observations, a slight deviation appeared systematically between both approaches. Finally, we explored the impact of the system’s confinement on this process, examining the consequences of particle-particle and particle-wall friction on the system macroscopic response. We mainly found that the degree of confinement and particle-wall friction have a relevant impact on the outflow dynamics. Our analysis demonstrated that the naive 2D approximation of this 3D flow process fails to describe it accurately.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
脑斧儿完成签到,获得积分10
1秒前
风趣的胜发布了新的文献求助10
2秒前
鲤鱼从安完成签到,获得积分10
2秒前
3秒前
高越发布了新的文献求助20
3秒前
李渠发布了新的文献求助10
4秒前
派大星完成签到,获得积分10
4秒前
hwj发布了新的文献求助10
4秒前
南歪歪发布了新的文献求助10
5秒前
共享精神的应助被renn采纳,获得10
5秒前
慕青的应助被阿达啊啊啊啊采纳,获得10
5秒前
5秒前
6秒前
牛从洋完成签到,获得积分10
6秒前
Yuan88完成签到,获得积分10
7秒前
Zero完成签到 ,获得积分10
7秒前
wu发布了新的文献求助10
7秒前
7秒前
8秒前
8秒前
liwenhao发布了新的文献求助10
8秒前
xu完成签到 ,获得积分10
8秒前
Leisle发布了新的文献求助10
9秒前
虚拟的盈完成签到 ,获得积分10
9秒前
bean完成签到,获得积分10
9秒前
Voiceless的应助被lili采纳,获得10
9秒前
FashionBoy的应助被hwj采纳,获得10
10秒前
10秒前
wu发布了新的文献求助10
11秒前
wu发布了新的文献求助10
11秒前
完美世界的应助被Cynthia采纳,获得10
11秒前
Mp4完成签到,获得积分10
11秒前
沫沫发布了新的文献求助150
12秒前
施梦得发布了新的文献求助10
13秒前
14秒前
haohao完成签到,获得积分10
14秒前
14秒前
LL发布了新的文献求助20
15秒前
Pomelo发布了新的文献求助10
16秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Improving the wear resistance of vehicle gear oil by oil soluble LaF3 nanoparticles and typical additives of gear oil 500
Boundaries and Bodhisattvas 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8184061
求助须知:如何正确求助?哪些是违规求助? 9573151
关于积分的说明 21829878
捐赠科研通 7781058
什么是DOI,文献DOI怎么找? 3434216
关于科研通互助平台的介绍 2558337
邀请新用户注册赠送积分活动 2480674