炭黑
热解炭
氢氧化钠
热解
材料科学
原材料
碳纤维
色散(光学)
扫描电子显微镜
表面改性
化学工程
盐酸
核化学
天然橡胶
制浆造纸工业
比表面积
能量色散X射线光谱学
傅里叶变换红外光谱
化学改性
废物管理
复合材料
化学稳定性
能源
腐植酸
红外光谱学
作者
Teerapat Anupabphan,Napan Narischat,Kampanart Theinnoi,Unalome Wetwatana Hartley,Chonlakarn Wongkhorsub
出处
期刊:ACS omega
[American Chemical Society]
日期:2025-09-09
卷期号:10 (37): 42451-42460
被引量:9
标识
DOI:10.1021/acsomega.5c02908
摘要
High Resolution Image Download MS PowerPoint Slide The pyrolysis of end-of-life tires presents a sustainable route for converting waste into valuable products, including pyrolytic carbon black (CBp). However, the high ash content in CBp (∼17–21%) limits its reinforcement performance compared with commercial carbon black (e.g., N330). This study investigates the enhancement of CBp through acid–base chemical treatment using hydrochloric acid (HCl) and sodium hydroxide (NaOH). Optimal duel treatment conditions (6 M HCl and 2 M NaOH, 70 °C, 60 min, 10 mL/g) reduced ash content from 17.15 to 2.25% and increased the Brunauer–Emmett–Teller (BET) surface area from 60.56 to 70.22 m 2 /g, surpassing that of N330 (39.08 m 2 /g). Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) revealed improved surface morphology and elemental purity, while Fourier-transform infrared (FTIR) and X-ray diffraction (XRD) confirmed enhanced functionalization and graphitic crystallinity. Although treated CBp exhibited only moderate improvements in mechanical properties within styrene-butadiene rubber (SBR) vulcanizates, it showed significantly better dispersion and elongation performance. A comparative Life Cycle Inventory (LCA) indicated that treated CBp (especially dCBp-duel) achieves superior purity and surface properties but at the cost of higher global warming potential (GWP) and water use. In contrast, raw CBp offers the lowest environmental burden and N330 has the highest energy demand. Trade-offs must be considered depending on application priority, performance, and sustainability.
科研通智能强力驱动
Strongly Powered by AbleSci AI