Efficient degradation of atrazine by magnetic porous copper ferrite catalyzed peroxymonosulfate oxidation via the formation of hydroxyl and sulfate radicals

Magnetic porous copper ferrite (CuFe2O4) showed a notable catalytic activity to peroxymonosulfate (PMS). More than 98% of atrazine was degraded within 15 min at 1 mM PMS and 0.1 g/L CuFe2O4. In contrast, CuFe2O4 exhibited no obvious catalytic activity to peroxodisulfate or H2O2. Several factors affecting the catalytic performance of PMS/CuFe2O4 were investigated. Results showed that the catalytic degradation efficiency of atrazine increased with PMS and CuFe2O4 doses, but decreased with the increase of natural organic matters concentration. The catalytic oxidation also showed a dependence on initial pH. The presence of bicarbonate stimulated atrazine degradation by PMS/CuFe2O4 at low concentrations but inhibited the degradation at high concentrations. Furthermore, the reactive species for atrazine degradation in PMS/CuFe2O4 system were identified as hydroxyl radical (HO) and sulfate radical (SO4(·-)) through competition reactions of atrazine and nitrobenzene, instead of commonly used alcohol scavenging, which was not a reliable method in metal oxide catalyzed oxidation. Surface hydroxyl groups of CuFe2O4 were a critical part in radical generation and the copper on CuFe2O4 surface was an active site to catalyze PMS. The catalytic degradation of atrazine by PMS/CuFe2O4 was also effective under the background of actual waters.