Influence of Decarbonisation and Phosphate Dosage on Copper Corrosion in Drinking Water Systems

Abstract The effect of softening/decarbonisation and dosage of orthophosphate on copper corrosion was studied in pipe rigs according to the German standard DIN 50931, part 1. A literature study with regard to the effects of phosphate dosing on copper corrosion has shown that on the one hand and in most of the cases a dosage of phosphate led to lower copper concentrations. On the other hand phosphate aggravated the copper corrosion in some cases. The mechanisms are not yet clear and the influence of phosphate on the corrosion of copper remains a question to be answered. Using standardised on‐site corrosion tests (DIN 50931‐1) with virgin copper pipes softening/decarbonisation has decreased the copper concentration. Two effects of phosphate on copper corrosion were noticed: Phosphate dosing decreased the copper oxidation and resulted in lower copper concentration in water. Likewise phosphate hindered the precipitation of cupric ions, which prolonged the existence of copper in water and resulted in a higher copper concentration. As a consequence, dosing phosphate can decrease or increase the copper corrosion, this depends on which effect is dominating.