钙钛矿(结构)
开路电压
醋酸铅
材料科学
电压
铅(地质)
无机化学
化学工程
光电子学
化学
电气工程
地质学
工程类
有机化学
毒性
地貌学
作者
Pavan M. Kodam,Sawanta S. Mali,Jyoti V. Patil,A. V. Mali,Gopal K. Kulkarni,Chang Kook Hong
标识
DOI:10.1021/acsaem.5c01649
摘要
All-inorganic cesium lead halide (CsPbI3–xBrx) perovskite solar cells (PSCs) have garnered significant attention due to their high-power conversion efficiency (PCE), thermally stable black perovskite phase, and strong potential for use as the top cell in tandem configurations. In this work, we successfully stabilized ambient-phase CsPbI2Br (x = 1) using a lead acetate Pb(Ac)2 additive. Pb(Ac)2 played a key role in regulating the crystallization process and stabilizing the photoactive black phase of CsPbI2Br. By incorporating 5% Pb(Ac)2 into the precursor solution, we achieved a notable enhancement in device performance, with PCE increasing from 12.33% (control CsPbI2Br device) to 16.04%. Simultaneously, the open-circuit voltage (VOC) increased from 1.231 to 1.323 V, among the highest reported for Pb(Ac)2-based inorganic perovskite solar cells. Furthermore, VOC increased up to 1.358 V for phenyltrimethylammonium chloride (PTACl) passivation. This result arises due to the reduced recombination and formation of the Pb–O surface. Moreover, the optimized 5% Pb(Ac)2-based device demonstrated excellent thermal and ambient stability, retaining over 90% of its initial performance after 100 h at 85 °C in air without encapsulation. These results highlight the effectiveness of Pb(Ac)2 in simultaneously boosting the performance and long-term stability of inorganic perovskite solar cells.
科研通智能强力驱动
Strongly Powered by AbleSci AI