High-Performance 2319 Aluminum Alloy via CMT-WAAM: Microstructure, Porosity, and Mechanical Properties

The process of cold metal transfer (CMT) wire arc additive manufacturing (WAAM) for 2319 aluminum alloy was studied. The research investigated the coarse and fine equiaxed grain bands and porosity of the 2319 alloy after solution aging treatment, with a focus on the mechanical properties and deformation behavior of the aluminum alloy at different positions and orientations. Pores and coarse second phases mainly appeared at grain boundaries but were also observed within coarse equiaxed grains. The yield strength of the top horizontal samples reached 325.5 MPa, one of the highest yield strengths reported for 2319 aluminum alloy in the literature. The coarse brittle second phases at grain boundaries were the main crack sources during the failure process of the samples. In the fine equiaxed grain layer, cracks propagated along the grain boundaries connected to the second phases, and the presence of pores accelerated crack propagation; in the coarse equiaxed grain layer, cracks directly penetrated through the grains.