Research on the dynamic response strength of multi wind turbines integrated foundation

The focus of this paper is on the conceptual design of offshore multi wind turbine integrated floating foundation (MWF) and the strength analysis method of floating structures considering motion response. Firstly, the maximum environmental load and ultimate motion attitude of MWF were used as boundary conditions to solve the problem of imprecise constraint loads in traditional analysis methods. Then, a stress solving equation based on motion state and inertia release was established to solve the equivalent accuracy problem of floating body motion state. Finally, through theoretical analysis, numerical simulation, and experimental testing, it was found that the stress solution method considered the motion state of the floating body in this paper to be more accurate and reliable, with an error of less than 10% compared to the stress results of experimental testing. Improved calculation accuracy by 30%. These studies provide more accurate analytical methods and theoretical references for predicting the strength of floating structures in actual oceans.