Life-cycle Analysis of Bioproducts and Their Conventional Counterparts in GREET

To further expand upon the literature in this field and to develop a platform for bioproduct LCA, we developed LCA results for ten bioproducts produced either from algal glycerol or from corn stover-derived sugars. We used Argonne National Laboratory’s Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREETTM) model as the platform for this study. The data and calculations reported herein are available to GREET users in a bioproducts module included in the fall 2015 GREET release. This report documents our approach to this analysis and the results. In Chapter 2, we review the process we underwent to select the bioproducts for analysis based on market and technology readiness criteria. In Chapter 3, we review key parameters for production of the two feedstocks we considered: corn stover and algae. Given the lack of publicly available information about the production of bioproducts, which is caused in large part by the emerging nature of the industry, we developed Aspen Plus® simulations of the processes that could be used to produce each bioproduct. From these simulations, we extracted the energy and material flows of these processes, which were important inputs to the GREET bioproducts module. Chapter 4 provides the details of these Aspen Plus simulations. It is important to compare the LCA results for bioproducts to those for their petroleum counterparts. We therefore also developed material and energy flow data for conventional products based mostly on the literature. These data are described in Chapter 5 and are also included in the GREET bioproducts module. In Chapter 6, we present results from this analysis and examine areas for refinement and future research.