Preparation and characteristics of sepiolite-waterborne polyurethane composites

Abstract A kind of organic/inorganic composite material composed of waterborne polyurethane and sepiolite was prepared in this work. Sepiolite was organically modified by three kinds of silane coupling agents, and then compounded with waterborne polyurethane through layer-by-layer method in order to prepare composite materials. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) show the crystal and chemistry structure of sepiolite samples, and confirmed the preparation of organic sepiolite. Scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) showed the surface microstructure and elemental content of sepiolite and organic sepiolite, and was consistent with the XRD results. Transmission electron microscope (TEM) examination of waterborne polyurethane composites surfaces showed that sepiolite particles were regularly dispersed in the waterborne polyurethane matrix. Thermal resistance of waterborne polyurethane composites was determined by thermogravimetry analyzer (TG) and derivative thermogravimetry analyzer (DTG), differential scanning calorimetry (DSC), gas chromatography (GC), and mass chromatography (MS). Mechanical behavior was examined by tensile strength tester, showed higher break strength than that of the control waterborne polyurethane. Therefore, organically modified sepiolite was considered to be a kind of wonderful inorganic material that could be used to improve the thermal stability and mechanical property of polymer.