腐蚀
溶解
材料科学
极化(电化学)
金属
氯化物
点蚀
X射线光电子能谱
冶金
降水
核化学
无机化学
化学
化学工程
物理
物理化学
气象学
工程类
作者
Jian Zhang,Pengfei Ju,Chaoli Wang,Yuchao Dun,Xuhui Zhao,Yu Zuo,Yuming Tang
标识
DOI:10.1134/s207020511901026x
摘要
Abstract The corrosion behaviour of 316L stainless steel (316L SS) in 10% H2SO4 solution (94°C) with various concentrations of NaCl (0–0.085 mol/L) was studied by immersion corrosion test and polarization methods, combined with SEM/EDS, XPS and XRD tests. The influence of NaCl on the corrosion of 316L SS was investigated. The results showed that at lower NaCl contents (0–0.0085 mol/L), the steel presented a general corrosion characteristic with a higher corrosion speed and the corrosion rate increased with the NaCl content. At higher NaCl contents (≥0.017 mol/L), the corrosion rate decreased remarkably due to the protective corrosion products precipitation which contained metallic sulphates and NaHSO4. However, the higher concentration of chloride ions caused micron pitting-like local dissolution on the surface. The addition of Na2SO4 effectively inhibited general corrosion of the steel because of a dense and continuous products layer enriched with more NaHSO4 and metallic sulphates formed.
科研通智能强力驱动
Strongly Powered by AbleSci AI