材料科学
合金
铝
共晶体系
冶金
微观结构
阳极
再结晶(地质)
腐蚀
电解质
极化(电化学)
变形(气象学)
复合材料
电极
生物
物理化学
古生物学
化学
作者
Yuming Xie,Xianghai Meng,Dongxin Mao,Yuexin Chang,Zhiwei Qin,Xinyan Ma,Long Wan,Yongxian Huang
标识
DOI:10.1016/j.scriptamat.2022.114551
摘要
Aiming at high-energy-density off-grid application, severe plastic deformation-modified Al-Li-Mg-Zn-Cu high-alloy aluminum obtained by deformation-driven modification was proposed to serve as anodes for primary aluminum-air batteries. Homogeneous microstructures induced by the fragmentation of second phases and dynamic recrystallization suppressed the formation of the hydroxides-eutectic skeletons to isolate anodes from alkaline electrolytes . The alloying elements contributed to the inhibition of hydrogen evolution self-corrosion, the mitigation of polarization, and the enhancement of the discharge voltage. The self-corrosion rate was only one-seventh of the 5N pure aluminum. The power and energy densities reached 88.3 mW cm −2 and 2.73 Wh g −1 , respectively, which is better than those of pure aluminum.
科研通智能强力驱动
Strongly Powered by AbleSci AI