工作职能
钨
电极
光电效应
工作(物理)
氩
激光器
大气压力
材料科学
分析化学(期刊)
阴极
电弧
弧光灯
原子物理学
弧(几何)
化学
光学
光电子学
冶金
几何学
热力学
物理
气象学
物理化学
数学
色谱法
作者
Manabu Tanaka,Masao Ushio,Mitsuru Ikeuchi,Yoshiro Kagebayashi
标识
DOI:10.1088/0022-3727/38/1/007
摘要
A method of in situ measurement of electrode work functions in free‑burning argon arcs during operation is presented. This technique is based on the photoelectric effect ocurring at the surface of a tungsten cathode with the use of a pulse laser system consisting of a NdーYAG laser and a dye laser. Three types of tungsten electrode namely pure W Wー2% ThO2 and Wー2% La 2O3 are used in this work. Free‑burning arcs are operated in argon at atmospheric pressure at cur‑ rents of 100 A and 200 A.The effective work functions of pure W Wー2% ThO2 and Wー2% La2O3 electrodes during ope‑ ration at a current of 200 A are found to be respectively 4.6 2.8 and 3.0 eV from in situ measurements. These results are very close to the work functions of pure W ThO2 and La2O3 obtained from the literature. The in situ measurements how‑ ever show that the effective work functions of pure W Wー2% ThO2 and Wー2% La 2O3 electrodes for an 100 A arc are respectively 2.9 eV 2.6 eV and 2.0 eV. It is shown that each effective work function for an 100 A arc clearly becomes low‑ er than that for a 200 A arc for all types of tungsten electrodes. (Some figures in this article are in colour only in the electronic version
科研通智能强力驱动
Strongly Powered by AbleSci AI