睡眠模式
无线传感器网络
节点(物理)
能量收集
功率(物理)
声发射
能量(信号处理)
压电
无线
事件(粒子物理)
结构健康监测
情态动词
传感器节点
压电传感器
声学
计算机科学
能源消耗
简单(哲学)
电子工程
过程(计算)
工程类
电气工程
功率消耗
无线网络
电信
无线传感器网络中的密钥分配
材料科学
结构工程
物理
计算机网络
哲学
高分子化学
量子力学
操作系统
认识论
作者
Stephen Grigg,Rhys Pullin,Matthew Pearson,David Jenman,Robert Cooper,Andrew Parkins,Carol Featherston
摘要
Acoustic emission (AE) is the spontaneous release of energy caused by the growth of damage, the monitoring of which gives an indication of the presence of damage within a structure. The current standard for AE localisation is difficult to apply in a low-power system as sensors must either be wired together or Node's time synchronised, which is power intensive. This paper proposes the use of a method of bonding three piezoelectric sensors in a small triangular array, which has previously been shown by Aljets et al. to be capable of locating sources in simple structures. In this prior work the wave's A0 mode was used to predict the angle of arrival and the distance the wave has travelled through single sensor modal analysis. This paper presents the development of hardware to apply this technique and testing that showed artificial sources could be located in simple plates to a good level of accuracy. The addition of complexity to structures significantly reduced accuracy. This prompted hardware modifications to use the S0 mode for angle prediction. Testing showed that this significantly improved performance in a complex composite structure. The power consumption of the device is very low, consuming 0.33 mW in sleep mode, 17.44 mW whilst waiting for an event and 38 mW to record, process and transmit an event. This level of consumption has the potential to be self-powered via energy harvesting.
科研通智能强力驱动
Strongly Powered by AbleSci AI