Ternary organic bulk-heterojunction strategy enables efficient light utilization for perovskite solar cells

Extending the photoresponse into the near-infrared region (NIR) is an urgent research topic in perovskite solar cells. A ternary bulk heterojunction (BHJ) layer composited with PC61BM, D18-Cl and Y6 was deposited onto the perovskite to broaden light absorption. The ternary BHJ layer can absorb low-energy photons in the NIR region (800–920 nm) and generate excitons. Subsequently, these excitons dissociate into free electrons and holes at the donor-acceptor interface, thus extending the device's photo response up to 920 nm. Moreover, due to the good electron transport capabilities of the acceptors Y6 and PC61BM in the BHJ film, the BHJ layer also acts as the electron transport layer in the inverted PSC device. The inverted P–I–N device based on perovskite/BHJ achieved an external quantum efficiency (EQE) up to 30% in the near-infrared range. Compared to control PSCs, the short-circuit current (JSC) increased from 21.64 to 24.35 mA cm−2, resulting in a high PCE of 19.88%. Additionally, the high hydrophobic surface of the ternary layer contributes to the good long-term stability of the device. The results demonstrate that the ternary organic bulk heterojunction is an effective strategy for achieving efficient light utilization in the near-infrared region and enhancing power conversion efficiency in perovskite solar cells.