鉴定(生物学)
过程(计算)
氨
计算机科学
工艺工程
化学
工程类
有机化学
程序设计语言
植物
生物
作者
Avariz Muhammad,Tri Partono Adhi
摘要
Ammonia is a widely produced chemical commonly known as a base for fertilizer.Recently, there has been much research about ammonia's potential as a carbon-free energy source and an eco-friendly H2 source for transportation fuel.Henceforth, moving forward is needed for ammonia production with higher efficiency.The most used ammonia production process is the Haber-Bosch process.There have been a lot of attempts at making this process more efficient and economically better, one of those is with the reaction of the Haber-Bosch process in 3 beds in series with fresh makeup between each bed and pre-heating of feed with effluent.From an economical and efficient standpoint, this method is very intriguing and beneficial.But a few aspects, such as operating conditions, need to be considered to prevent operation failure and control issues.This paper uses a steady state simulation to represent the process behaviour and set the operation parameters limit that will cause instability or maintain stability.Aspen-Hysys is used as the main simulation processor to study the harmonic oscillation of the process temperature.The result shows that to maintain the stability of each bed while providing the highest conversion of ammonia, a bed volume configuration of 6 m 2 for the first and second bed and 18 m2 for the third bed with a quenching ratio of 0,44:0,34:0,22 for bed 1,2, and 3. a fresh feed temperature in the range of 305 o C is needed with a constant pressure of 162 bar of operating condition.
科研通智能强力驱动
Strongly Powered by AbleSci AI